Ceramic implants made of zirconia are regarded in implantology as particularly demanding to manufacture. Episode 129 of the podcast Queens & Sons of Dentistry offers a rare insight into the industrial production of these implants: on a guided tour, Torsten Burlage, owner of the manufacturing site where ceramic implants of the Neodent brand are produced, leads through the production – accompanied by Dr Maximilian Fuhrmann, who by his own account uses these ceramic implants regularly in his practice.
The raw material: zirconia feedstock as the key to success
At the beginning of the process stands a material that Burlage describes as rather inconspicuous – and at the same time as one of the keys to success: the ceramic feedstock. It is a fine granulate of zirconia powder with a grain size of less than 0.5 micrometres, coated with wax and plastic. This coating makes the material flowable at high temperatures and is what makes it possible in the first place to inject the powder into a mould and thus enable the shaping.
Before processing, the granulate is prepared and pre-dried so that it always enters the machines under identical drying and temperature conditions. Even at this stage, a basic principle of the production emerges that Burlage emphasises several times during the tour: processes are to remain absolutely repeatable, changes are avoided as far as possible and everything is standardised. For this reason, abutments and implants generally run on machines permanently assigned to them, even though the systems would be interchangeable.
Shaping at up to 1,500 bar
In fully automated machines, the material is then pressed into moulds at high temperature at 1,000 to 1,500 bar. The result is an implant that already corresponds fully to the final design – with all the details of the geometry – but is still around 30 per cent larger. This excess size is due to the plastics and waxes it contains, which are removed again in the later process steps.
Because every implant is produced in the same mould and at the same pressure, the shaping is always identical. Burlage speaks of a perfect reproduction of the entire external geometry. The parts are removed by a robot that, in this production facility, goes by the name of Horst. The robot itself comes from a German manufacturer, but the automation, the handling and the processes around it are the company's own developments.
Surface quality that hard machining does not achieve
Under the microscope, the actual advantage of the process becomes visible. With conventional hard machining of ceramics, grinding marks and notches would be discernible and the result would be coarser overall. With powder injection moulding, by contrast, the entire geometry is reproduced without any such traces. In the podcast, the assessment is voiced that the process achieves a perfection that is almost unique in engineering.
Powder injection moulding and the titanium turning process compared
The conversation also makes clear the differences from titanium production. Titanium implants are turned from titanium bars three to six metres long, with the material being removed by cutting – using a great deal of oil and, depending on the geometry, with relatively long machining times. Powder injection moulding, on the other hand, works dry and cleanly; Burlage puts the machine time at about one tenth of that of a titanium implant.
On costs, however, he differentiates: the development process is considerably more elaborate with powder injection moulding, because very expensive tools are required. Months pass per part until the tools and process parameters have been developed. In return, the end result is an absolutely repeatable and precise product – and in high volumes, ceramic implants will, in Burlage's estimation, probably come into the price range of titanium implants in future.
The tour thus makes one thing clear: modern ceramic implants are not artisanal goods, but the result of a highly standardised industrial process whose effort lies above all in development – and which, once established, runs with impressive consistency.